Stabilized / Remote Heads
Scorpio Stabilized 5-Axis Head
TECHNICAL SPECIFICATIONS
Speed: 120º/Second all axis
PAN y TILT 360ª
Rotation: ROLL +/- 30ª
Back Pan: Automatic
Head Weight: 33kg / 72 lbs
Max camera weight: 45kg / 100lbs
Power requirements: 30V DC
Stand By Current: 800 mA
Maximum Current: 8A
Maximum usable lens focal: 300 mm
Set-Up Time: The same as a standard Scorpio Head
The Scorpio Stabilized Head can be controlled two ways:
- By cable up to 500 m (1500 f)
- By microwave Scorpio Radio System.
Mini Scorpio Stabilised V Head
The Mini Scorpio Stabilized Head V represents a new standard in small stabilized heads. Building on the principles of the original Scorpio Stabilized V, this latest model features innovative gyros, advanced mechanics, and cutting-edge software. These enhancements enable the Mini Scorpio to be both compact and lightweight while maintaining a high capacity and exceptional stabilization performance. It's an ideal solution for filmmakers seeking advanced stabilization in a smaller form factor, ensuring smooth and professional results in their projects.
TECHNICAL SPECIFICATIONS
Turn speed: 360º/2 seconds PAN 360º / TILT 360º
Axis movement: ROLL +/- 60º
Head weight: 20kg / 45 lbs
Max. Payload: 20kg / 45 lbs
Voltage requirements: 30V DC
Standby consumption: 800 mA
Max. usable focal lens: 200 mm
Setup time: Same as Standard Scorpio Stab Head
Water resistant
The Scorpio Head can be controlled by:
Cable up to 500 m (1500pies)
Radio using the Scorpio Radio system.
Flight Head Mini 3 + 4
SPECIFICATIONS
Height: 0.64cm
Width: 0.49cm
Length: 0.68cm
Tilt / Pan / Roll: 200º / 360º / 270º
Payload: up to 15kg
DOWNLOADS
> Compatible cameras & lenses
> Dimensions
> Flight Head Mini 3 and 4 Drawings
> Flight Head Mini 3 and 4 Specs
Flight Head Apex Stabilised Head
FLIGHT HEAD APEX
Three axis Flight Head Apex engineered for superior filming performance and is one of the most compact, highly versatile and effective stabilized remote heads on the market. Apex offers smooth and responsive control eliminating camera shakes and vibration during fast and rough moves. Its open architecture and user friendly design make it the remote head of choice for a wide range of tracking shots. Works on all types of camera cranes, arms, dollies, high speed tracking systems, camera cars, cablecams, etc.
SPECS:
Effective stabilization throughout 250mm focal length
Pan limit: 360° continuous
Tilt limit: +60°; -240°
Roll limit: ±42°, auto horizon or steerable
Speed: 120°/ sec
Temperature range: from -25°C up to +40°C
Head weight: 33 kg
Payload: up to 40 kg
POWER REQUIREMENTS:
24-30V DC
Standby: 1.2A
Dynamic Max.: 15A
Talon Remote Head
The talon head is a extremely stable and dynamic two axis non-stabilized remote head with true motion control capability and parameters. Utilizing powerful but quiet drivetrains and full slip rings, the Talon head is capable of very smooth and precise tracking movement.
The Talon Head is extremely reliable, easy to operate, and capable of imperceptibly slow or extremely fast moves with the hand wheels and for broadcast environments the talon head has a joystick, and focus and zoom capabilities.
Features
• Joystick control for Pan/Tilt/Zoom, separate Knob for Focus
• Record and move to up to 2000 marked positions
• Record and playback 1 hour and up to 2000 takes
• Share recorded data w/ laptop: upload/download
• Programmable max. speeds for individual motors
• Programmable smoothing controls for each motor
• Precise homing control via pushbutton commands
• 2500′ max std extension, longer w/ fiber optic option
• Wireless Option available
• Programmable motion limits for both pan & tilt
• Servo tuning available at Full Function Remote
• Fuji/Canon/Preston serial & analog lens control
• Zoom Compensation for smooth moves at telephoto
• Camera sync. feature for frame-accurate shots
• Advanced Intervalometer provides 3 modes for stretching moves in time
• Extremely rigid for smooth motion @ telephoto
• Full slip rings for continuous 360 degree motion
The Advanced Controller, aka 'Full Function Remote,' is the brains of the system that contains all the parametric motion control and recording capabilities, as well as an LCD readout, connector panel, pan/tilt joystick, and zoom/focus controls. The Advanced Controller can be used stand-alone for desktop/tripod operations or paired with optional Control Input Units such as the hand wheels or pan bars.
SPECS:
Weight: 90 lbs
Dimensions: 33 x 21 x 16 in
UPC: 877038008014
Height: 19.5″
Width: 12″
Depth: 6″
Weight: 21 lbs
Camera weight: 50lbs
Camera clearance:
Vertical – Camera pointing straight down/up: 11″ from center of cam plate to base.
Horizontal – Camera pointing level horizon underslung: 15.5″ min / 17.5″ max.
With 2″ head extension: Vertical 13″, Horizontal 17.5″ min / 19.5″ max.
With 5″ head extension: Vertical 16″, Horizontal 20.5″ min / 22.5″ max
Pan/Tilt speed: Up to 210 degrees/second
Mechanical travel: Unlimited rotation for each axis
Power Requirements: 24VDC regulated, 10A max, absolute min/max 20VDC-30VDC

DEFY EX 350 Stablized Head
Find our more about our DEFY EX 250 Stabliized Head here.
Mo-Sys L40
Our precise, robust and lightweight 2-axis head for high-end digital cinematography is ideal for medium-sized camera packages, for example, ARRI Alexa with a large zoom lens.
We also have the 360' Roll Axis and Handwheel System.
Find out more about the Mo-Sys L40 here. Find out more about the Roll Axis here.
Ronin 2
Versatility
A newly designed detachable grip allows the Ronin 2 to stand up on its own and is easily separated when the lower part of the handgrip is not needed. Ronin 2 is also highly compatible with cranes, dollies and cablecams.
Integrated
Power systems are now tightly integrated into Ronin 2, capable of powering its motors and the attached camera and accessories without dangling cables or multiple power systems. As it uses a dual battery system, filmmakers can hot swap to keep the camera and accessories powered and maximize shooting time.
Easy
The simplicity of Ronin has been amplified with Ronin 2, making setup and use easier than ever. Everything, from mounting cameras to balancing and tuning, powering accessories and transportation has been tweaked and refined for ease and speed.
Find out more about the Ronin 2 here.
Maxima Gimbal
The MAXIMA is a three-axis, electronically fully stabilized, high-performance gimbal. Its compact, lightweight design and perfect center of gravity provide new levels of freedom, while its stable construction allows for compatibility with any camera system weighing 30 kg / 66 lb or less. Cameras like the ALEXA 35, Mini LF, and Mini; AMIRA; ARRICAM LT; ARRIFLEX 235 and 416; any TV Box Camera; or cameras with similar dimensions to these, can be used with the MAXIMA. Using the new SAM plates ensures fast setup times and perfect COG (centre of gravity) of the camera.
At the centre of the unique design is an extremely durable ball bearing roll cage, as well as specially designed brushless high-torque motors. Together they deliver smooth, dynamic camera moves and plenty of power in reserve, no matter how demanding the application.