Dollies

Hybrid III

Its variable chassis leg positions, equipped with a cam-lock, allow it to fit into tight locations easily. The dolly is compact and lightweight, making it highly portable. Additionally, it features interchangeable wheels suitable for various terrain conditions and a variable camera head, providing versatility for different filming setups. With the ability to perform five lifts on a single charge, the Hybrid III Dolly is an efficient choice for production needs.


Specifications (approximate):

Min Dolly Carrying Weight: 179kg / 395lbs

Steering Modes: Crab/Conventional

Min Mount Height 152.4cm / 5ft

Max Mount Height 182.88cm / 6ft

Min Chassis Width 68.68cm / 27in

Min Chassis Length 116.8cm / 3ft 10in

Hybrid IV

The Hybrid IV features a sliding side board system that allows simple change of side board positioning forward or back, hinged corner boards makes side board change over simple & quick, versatile & adjustable front board change in mode from upper to lower positions in seconds, adaptable sliding board system with both high and low positions allowing a variety of positions for the side boards without removing or changing the boards, three types of steering: Conventional, Crab and Round, float/normal control valve that enables continuous up & down capability of the arm, allowing non-stop movement, Built in heater system for constant arm speed, even in cold weather conditions.

Specifications (approximate):

Min Dolly Carrying Weight: 179kg / 395lbs

Steering Modes: Crab/Conventional

Min Mount Height 152.4cm / 5ft

Max Mount Height 185.42cm / 6ft 1in

Min Chassis Width 68.68cm / 27in

Min Chassis Length 116.8cm / 3ft 10in

Super PeeWee III+

  • Incorporates a Universal Leveling Head that Locks into 4 Different Positions
  • New Arm Design increases Vertical Travel and Rigidity
  • Hardened Stainless Steel Bushings
  • Compact and Lightweight for Travel and Storage
  • Improved Arm System allows for up to 4 full Lifts on one charge
  • Universal Stop Valve Allows Feathered Stops, as well as, Precise, Repetitive Moves
  • Universal Stop Valve Allows Settings on Upper and Lower Stops
  • New Control Valve Design is Faster and Quieter While Allowing Smooth Stops
  • New Wheel Composition Allows increased Rigidity, as well as, Silent Operation on Track
  • New Wheel Composition Allows Easier Steering and Maneuverability
  • Special Off Road Wheel additional accessory for transport over rough terrain
  • Works on Both Straight and Curved 24 1/2 Tubular Track or 880 mm Track
  • Many Accessories Available

Super PeeWee IV

The Super PeeWee IV offers a revolutionary three mode transmission: Conventional, Crab & Round Steering and can shift while the Dolly is moving or stationary. The transmission allows perfect steering geometry when configuring the chassis to its various leg positions.

Specifications:

MAX PAYLOAD 350 LBS

DOLLY WEIGHT 295 LBS 

DOLLY WIDTH 20" 

DOLLY LENGTH: STANDARD/TRACK MODE 42" 

DOLLY LENGTH: TUCKED IN 36" 

WHEEL POSITION: PULLED IN 16" TO CENTER 

WHEEL POSITION: STANDARD 24.5" STANDARD TRACK MODE 

LEG POSITIONS 5, FITS ALL CURVED TRACK & CRAB MODE

GFM Primo Dolly

The GF-Primo dolly from Grip Factory Munich has the strongest electromechanical column, rotatable and removable. Designed for ease of transport, it's extremely reliable under tough conditions.

This dolly allows you to choose from 5 different steering rod positions, so the dolly grip can decide the best working position for every situation.

SPECIFICATIONS

Carrying weight 350 lbs / 160 kg

Maximum column lift payload 551 lbs / 250 kg

Transport weight dolly base 176 lbs / 80 kg

Transport weight column without batteries 150 lbs / 68 kg

Maximum column height (without risers) 55,1 in / 140 cm

Minimum column height 27,6 in / 70 cm

Vertical lift range 27,6 in / 70 cm

Duration of column lift 2.5 sec

Dolly base maximum length (wheels fully extended) 42,1 in / 107cm

Minimum dolly base widths 20,9 in / 53 cm

Standard dolly base widths (track position) 31,1 in / 79 cm

Wireless hand control indoor range 90 ft / 30 m

Wireless hand control outdoor range 656 ft / 200 m

Wireless frequency 2,4GHz – FHSS

Creeper Butt Dolly

The Creeper Butt Dolly allows a handheld camera operator to sit and crab, push, or pull their way across a stage. The Dolly is height-adjustable, and the simple system of various-length riser rods can be changed in seconds. Its ultra-smooth and silent operation makes it ideal for low-angle shots.

Specifications:

Max Camera Plate Height 63.5cm / 25in

Min Camera Plate Height 0.1cm / 4in

Dolly Length min/max 45.75cm / 18in

Dolly Width min/max 45.75cm / 18in

Dinky Dolly

The Dinky Dolly is a portable, four-wheel steering dolly manufactured with a solid frame. It is equipped with pneumatic wheels, a push/pull bar that can be operated from either end of the dolly, and, if needed, a seat support system. The steering mechanism enables a very tight and accurate turning circle. The Dinky Dolly can run on straight or curved track.

Specifications:

Max Nose Load 200kg / 440lbs

Max Dolly Capacity (universal centre mount) 200kg / 440lbs

Dolly Length min/max 80cm / 31.5in

Dolly Width min/max 75cm / 29.5in

Fisher 10

This stable, reliable dolly offers operators versatile features and a wide variety of accessories. The Fisher Model 10 is smooth, quiet, and easy to use, with a reputation for being safe, well-made, and low-maintenance.


Specifications:

Max Camera Plate Height 160cm / 63in

Min Camera Plate Height 35cm / 13.5in

Min Camera Plate Height (w/ Adapter) 7.5cm / 3in

Boom Travel 119cm / 47in

Max Nose Load 227kg / 500lbs

Max Dolly Capacity (universal centre mount) 544kg / 1200lbs

Dolly Length min/max 141cm / 55.5in

Dolly Width min/max 65/81cm / 26.5/32in

Steering Post / Handle Length 98cm / 38.5in

Turn Radius (conventional) 112cm / 44in

Turn Radius (round steer) 56cm / 22in

Operational Weight (w/o payload) 190kg / 420lbs

Fisher 11

The Model 11 is the smallest Fisher dolly and shares the same controls and characteristics of the Model 10, along with a complete line of accessories. Operators can utilize the Model 11's compact size, three-way steering, and solid lift beam to perform a wide variety of shots.


Specifications:

Max Camera Plate Height 131cm / 51.5in

Min Camera Plate Height 35cm / 14in

Min Camera Plate Height (w/ Adapter) 9cm / 3.5in

Boom Travel 85cm / 34.5in

Max Nose Load 91kg / 200lbs

Max Dolly Capacity (universal centre mount) 408kg / 900lbs

Dolly Length min/max 101cm / 40in

Dolly Width min/max 52/65cm / 20.5/25.5in

Steering Post / Handle Length 100cm / 39in

Turn Radius (conventional) 85cm / 33.5in

Turn Radius (round steer) 41cm / 16in

Operational Weight (w/o payload) 145kg / 320lbs

Skateboard Dolly

The Skateboard Dolly is a platform track dolly that allows for quick, multipurpose use. Able to run on straight or curved track, the Skateboard Dolly is equipped with boogie wheels and has several location tie-down points to secure equipment.


Specifications:

Min Camera Plate Height (platform height) 15cm / 6in

Max Nose Load 200kg / 440lbs

Max Dolly Capacity (universal centre mount) 200kg / 440lbs

Dolly Length min/max 132cm / 52in

Dolly Width min/max 81cm / 32in

Steering Post / Handle Length (cm) Variable

Operational Weight (w/o payload) 44kg / 97lbs

Wildcat Desert Dolly

The Wildcat Desert Dolly is a carefully engineered, wide-profile tire-tracking and load-carrying dolly that can tackle multiple roles on set. It is light enough to lift onto a roof rack, but tough enough to carry over a 1-ton load. Featuring precision wheel hubs and optimum steering geometry, it can handle demanding tracking moves where tracks are not feasible.


Specifications:

Min Camera Plate Height: (low-high platform mode) 21-33cm / 8.25-13in

Max Nose Load: 200kg / 550lbs

Max Dolly Capacity (universal centre mount): 200kg / 550lbs

Dolly Length min/max: 170cm / 67in

Dolly Width min/max: 128cm / 50.5in

Steering Post / Handle Length: 104cm / 41in

Operational Weight (w/o payload): 60kg / 132lbs

Defy Rhythm Track

The DEFY Rhythm is a fully automated remote dolly system that can handle heavy payloads. It comes with a 100ft / 30.48m long track.

You can adjust the speed, acceleration, and stopping point. The Rhythm can go as fast as 30mph / 48.28kph or as slow as 0.1 ft/sec.

Find out more about our DEFY Rhythm Track here.

Dana Dolly

Dana Dolly "Universal" 150 kit. 

Includes: Dana Dolly, 2-"Universal" Style Track Ends, 1-100mm Ball Adapter, 1-150mm Ball Adapter, Center Support, Tool, Washer. 

Weight 28 kg 

Dimensions 21 × 21 × 9 cm

Desert Dolly

Also known as the 'Round-D-Round' Dolly, this is the next generation in Doorway Dolly development. Based on the industry proven designed and engineered Matthews Doorway Dolly, the new Round-d-Round model offers all-wheel steering which allows for greater turning flexibility and will turn in a tight 6 foot (2 meter) circle.


The camera operator seat will mount in six different fixed locations. Steering from both ends of the dolly will allow unlimited camera positioning as the dolly rolls on track with either Hot Buttons or the Matthews Centipede or on the ground with the standard pneumatic rubber tires. Load capacity is over 1100 pounds (500kg) and the platform is carpeted for a non-slip, low-maintenance surface.


Doorway Dolly

Meet our versatile 4×4 doorway dolly: Maneuver with ease through any terrain or doorway with the unique 4- and 2-wheel steering. Built for stability and equipped with plenty of accessories for your filming needs:
  • 4- and 2- wheel steering mode
  • big wheels and spacious platform
  • numerous mounting positions for accessories


PAYLOAD: 300kg

MAX WIDTH: 76cm

The maximum width of the 4x4 DOLLY is 76cm. It's designed to fit through every conventional door.

Steering Modes: 3

Three different steering modes give you absolute flexibility during your shots.

MOUNTING OPTIONS: 7

The 4x4 Dolly offers you maximal versatility with numerous mounting options.

Rickshaw Dolly

At Celtic Grips, we have a variety of Rickshaw Dollies available, depending on your needs.

Features of our Rickshaw Dollies:

  • Modular Design
  • Easy Installation
  • Multi-Terrain Applications
  • Optional Accessories

Tyre Quick-Release Design

Quick tyre replacement by one person, adapt to different road conditions.

Detailed Assembly Method Instructions on the Base Plate

Detailed installation tips for different templates for fast assembly + transition.

Adjustable Steering Torque

Eliminate the jitters of universal wheels, adapt to different payloads and road conditions.

Adjustable Seat Design

Adjustable seat fits different height and payload.

All-Terrain Compatible

Optional terrain tyres can be selected to fit different scenes.

Sand Wheels Kit

Easy and stable to use in sand or under extreme payload.

Spoke Wheels Kit

Low resistance + fast push and movement

Rail Wheels Kit

Easily switched to light or heavy rails, quite stable movement and fast transition.

Steadicam

Rickshaw carries all weights, filmmakers can focus more on images.

GF-Jib Compatible

Easy to switch compositions even with heavy loads.